|
Kent 3KTM 3VS XL Variable Speed Vertical Knee Mill
Kent USA Delivering Quality, Value & Service since 1979
3 HP spindle motor, variable speed head
9” x 49” hardened and ground table
Table, saddle, and knee with hardened and ground dovetail ways
Precision ground leadscrews with backlash compensating double nut
Precision bored and ground milling head, with super precision ABEC-7 bearings
Meehanite® casting, with built in coolant reservoir in machine base
Centralized one-shot lubrication, with metered check-valves
MACHINE SPECIFICATIONS:
|
Table size
|
9” x 49”
|
|
Table travel (X-axis)
|
35”
|
|
Saddle travel (Y-axis)
|
12”
|
|
Knee travel (Z-axis)
|
15”
|
|
Quill travel
|
5”
|
|
Ram travel
|
14.5”
|
|
Spindle motor
|
3 HP (1750 rpm @ 60 Hz)
|
|
Spindle speed
|
60-500-4200 (2 range, Hi/Low)
|
|
Spindle taper
|
R-8
|
|
Quill diameter
|
3.375”
|
|
Quill feed rate
|
0.0015/0.003/0.006” per rev
|
|
Drilling capacity (manual)
|
0.75” diameter
|
|
Drilling capacity (power)
|
0.37” diameter
|
|
Boring capacity
|
6.0” diameter
|
|
Milling capacity
|
2.0 in3/min
|
|
Maximum work load (center)
|
750 lbs
|
|
Machine Net weight
|
2450 lbs
|
|
Shipping Weight/Dimension:
|
2550 lbs 72” x 72” (skid)
|
|
